Lightweight Antistatic Clogs Work Shoes with Straps

USE AND MAINTENANCE
To get the best service from your footwear, we recommend:

1. Choose the right model to suit the specific requirements of the work place and the relative environmental/atmospheric conditions.
2. Choose the right size, preferably by trying the boots/shoes on.
3. When not in use, keep your footwear in a dry, well-ventilated place. 
4. Inspect your footwear for signs of damage before each use.
5. Clean your footwear regularly as follows:
   - full grain leather uppers: use a soft brush, cleaning paper, cloth, and clean with tepid water
   - nabuk or suede uppers: use a small piece of natural rubber or use a wire / hard plastic brush; as an alternative you can also use thin san- dpaper. Clean with tepid water.
   - fabric uppers (Kevlar® , Cordura® , etc): clean with a sponge or cloth and water, then dry with a soft cloth.
   The frequency with which you need to clean your footwear will depend on the conditions of use. After every use it is recommended to check the footwear and to take away the removable inner sole so that drying is accelerated. It is also suggested to wash the inner sole regularly at 30°C by hand washing and possibly with some neutral soap (except for leather inner soles).
6. Do not use aggressive cleaning products (petrol, acids, solvents, alkalis, etc.) as these could compromise the quality, safety and durability of the PPE.
7. Do not dry your footwear near or in direct contact with heat sources (stoves, radiators, open fireplaces, direct sunlight, etc.).